westcoastGT
5000 Posts Club!
Its about as simple as I replied I believe if you search Vent covers you'll find a bunch of stuff, several of the old timers here have done this and it was a popular thread
Good luck
Last edited:
Rokblokz Tire Splash Guards
- Thread starter NIU_Huskies
- Start date
Good luck
rdromance
Active Member
Here's the template
NIU_Huskies
Active Member
- Joined
- Dec 23, 2019
- Messages
- 377
- Reaction score
- 266
- Points
- 68
The Rokblokz arrived tonight. I'll install them sometime this weekend but here's some pictures in the meantime.
______________________________
mhal8876
Stinger Enthusiast
Nice! I might get the SLIMZ version on mine.
westcoastGT
5000 Posts Club!
can you reverse them to hide the logo ??
From interior to exterior to high performance - everything you need for your Stinger awaits you...
NIU_Huskies
Active Member
- Joined
- Dec 23, 2019
- Messages
- 377
- Reaction score
- 266
- Points
- 68
My guess is no because then the holes won't line up with the mounting points. But I got the logo in black so it wouldn't stand out as much. You can get the logo in other colors.
NIU_Huskies
Active Member
- Joined
- Dec 23, 2019
- Messages
- 377
- Reaction score
- 266
- Points
- 68
Sorry all, I didn't get to finish installing all of them this weekend. You have to take off the wheels in order to get them in unless you have the world's shortest screwdriver. I took off one wheel and decided to black out the wheel. I will do the rest of the wheels and splash guards throughout the upcoming week. I also bought the mesh for the front wheel well inlets and painted those black.
One thing that is annoying is there is no center jacking point for each side of the car. So I have to jack up each corner and have to do the wheels one-by-one.
One thing that is annoying is there is no center jacking point for each side of the car. So I have to jack up each corner and have to do the wheels one-by-one.
westcoastGT
5000 Posts Club!
I used these for the OEM mud guards .....................no need to remove the wheel
NIU_Huskies
Active Member
- Joined
- Dec 23, 2019
- Messages
- 377
- Reaction score
- 266
- Points
- 68
Oh wow, never seen a screwdriver like that before. Gonna have to see if my local Harbor Freight has one.
I still plan to take off all the wheels to black them out.
NIU_Huskies
Active Member
- Joined
- Dec 23, 2019
- Messages
- 377
- Reaction score
- 266
- Points
- 68
Well, make sure if you order these for a 2019 Stinger that the front flaps include hardware that fits the bottom mounting hole. The other two holes came with retainer clips for the factory holes for the screws to grab into. The #10 screw they provided doesn't work and they didn't provide extra retainer clips for the bottom mounting holes. I emailed Rokblokz the issue tonight. Let's see what they say.
______________________________
From interior to exterior to high performance - everything you need for your Stinger awaits you...
Same thing happened with my OEM mudguards. Rears went on perfect, fronts, the mounting screw for the bottom was too small for the hole.
NIU_Huskies
Active Member
- Joined
- Dec 23, 2019
- Messages
- 377
- Reaction score
- 266
- Points
- 68
What did you end up doing, you end up acquiring the button tabs or did you use a screw? I know the OEM mudguards i took off used three button tabs in the front.
I just have the rears on and gave up on the fronts. I'm interested in these since they're wider and nicer looking so hope they update you on the front screw soon
NIU_Huskies
Active Member
- Joined
- Dec 23, 2019
- Messages
- 377
- Reaction score
- 266
- Points
- 68
Here's a view of the rear mudflap from behind so you can see how wide and how much coverage they provide. Still waiting on an email response from Rokblokz, they don't have a customer service number to call.
I had the same issue last month with my Slimz. I emailed them and they were great about sending hardware for the bottom holes. No complaints
From interior to exterior to high performance - everything you need for your Stinger awaits you...
namja
Stinger Enthusiast
Are the guards meant to be tilted like that? And is it just me or is that wheel not aligned?
______________________________
NIU_Huskies
Active Member
- Joined
- Dec 23, 2019
- Messages
- 377
- Reaction score
- 266
- Points
- 68
It's been two days and I haven't heard back from them yet via email.
NIU_Huskies
Active Member
- Joined
- Dec 23, 2019
- Messages
- 377
- Reaction score
- 266
- Points
- 68
Maybe just the angle I took the picture. I put the hardware in the mounting holes so there isn't much adjusting that can be done. My car has less than 1,000 miles, so if the alignment is off it came from the factory that way.
NIU_Huskies
Active Member
- Joined
- Dec 23, 2019
- Messages
- 377
- Reaction score
- 266
- Points
- 68
I emailed them again this afternoon and they responded pretty quickly.
They said they think if they send their red nylon clips it should solve the issue and that screw should work. @Dieselxx Is that the same hardware they sent you?
Yes that is exactly what they sent me. Two nylon inserts. They told me their test car had inserts. So originally they thought, because my car is Canadian, it may be different. I guess that's not true lol
From interior to exterior to high performance - everything you need for your Stinger awaits you...
