95oRANGEcRUSH
Active Member
Having an issue with my driver’s door switch lighting and the changing of different ambient lighting colors. They seem to be related. No other lighting issues besides these 2 things.
About a few months into owning my car I was driving to work at night and the lighting on the driver’s door switches would randomly all flicker off/on. There was no pattern and the duration of how long they were off would be a half second to upwards of a few seconds. The seat memory lights were not impacted.
Just by chance, I started messing with things in the screen and noticed my ambient lighting wouldn’t change sometimes and it gave me a body control module error. This has probably happened 5 times total in 10 months where both the door switch lights and ambient lighting do this together but never have they done it separately.
Take it to the dealer in November and they can’t reproduce either error and there’s no stored codes. They claim to have reset the pin tension on the harness for the switches and packed it with dilectric grease.
Today, had the same issue driving home from work. Restarted the car and that stopped the door switches from flashing. However the ambient lighting gave me an error of “vehicle system connection is unstable. Please try again later”. So say it did it for the default blue option, that error would pop up, but if I kept trying blue it would eventually take. Some colors would throw the error and some wouldn’t. This time there was no BCM error. Planning on taking it back in but any other suggestions?
About a few months into owning my car I was driving to work at night and the lighting on the driver’s door switches would randomly all flicker off/on. There was no pattern and the duration of how long they were off would be a half second to upwards of a few seconds. The seat memory lights were not impacted.
Just by chance, I started messing with things in the screen and noticed my ambient lighting wouldn’t change sometimes and it gave me a body control module error. This has probably happened 5 times total in 10 months where both the door switch lights and ambient lighting do this together but never have they done it separately.
Take it to the dealer in November and they can’t reproduce either error and there’s no stored codes. They claim to have reset the pin tension on the harness for the switches and packed it with dilectric grease.
Today, had the same issue driving home from work. Restarted the car and that stopped the door switches from flashing. However the ambient lighting gave me an error of “vehicle system connection is unstable. Please try again later”. So say it did it for the default blue option, that error would pop up, but if I kept trying blue it would eventually take. Some colors would throw the error and some wouldn’t. This time there was no BCM error. Planning on taking it back in but any other suggestions?