PRESSERtech Kia Stinger GT Dyno RESULTS!!
- Thread starter PRESSERtech LLC
- Start date
Not Here Anymore
Stinger Enthusiast
Tomorrow I have a new DynoCom run at 2:00 pm here 
Not Here Anymore
Stinger Enthusiast
Looks like my car will be running off of Shell 91 V POWER from now on , and when I get chance , this March 6 at I have a DynoCom , Dyno pull runs , unless something happens and ,I will give a report on my numbers, and even for a mild stage 2 tune from Pressertech and the gave great customer service according to Classified Motorsports who looked after getting the tune for me , they really stand up for their tunes !
I will now say that since the solution has been found and , by using a different brand of fuel
️Recommend to me by Classified Motorsports ,
limp mode is no more and to say that it made a difference would be in fact a under statement lol . I have done many launches and roll on and full throttle rolls and , not even close to any problems what so ever.
The Pressertech tune is smooth and with the awesome results yesterday after just filling up the gas and windshield washer , with passenger, it pulled very well indeed , Dyno number to come soon . This car is my only car and DD , so smooth with power all I can say is “Thanks Pressertech” !!!!!!!!!
, and when I get chance , this March 6 at I have a DynoCom , Dyno pull runs , unless something happens and ,I will give a report on my numbers, and even for a mild stage 2 tune from Pressertech and the gave great customer service according to Classified Motorsports who looked after getting the tune for me , they really stand up for their tunes !I will now say that since the solution has been found and , by using a different brand of fuel
️Recommend to me by Classified Motorsports , limp mode is no more and to say that it made a difference would be in fact a under statement lol . I have done many launches and roll on and full throttle rolls and , not even close to any problems what so ever.
The Pressertech tune is smooth and with the awesome results yesterday after just filling up the gas and windshield washer , with passenger, it pulled very well indeed , Dyno number to come soon . This car is my only car and DD , so smooth with power all I can say is “Thanks Pressertech” !!!!!!!!!
Last edited:
Not Here Anymore
Stinger Enthusiast
Looks like my car will be running off of Shell 91 V POWER from now on
I will now say that since the solution has been found and , by using a different brand of fuel
limp mode is no more and to say that it made a difference would be in fact a under statement lol . I have done many launches and roll on and full throttle rolls and , not even close to any problems what so ever.
The Pressertech tune is smooth and with the awesome results yesterday after just filling up the gas and windshield washer , with passenger, it pulled very well indeed , Dyno number to come soon . This car is my only car and DD , so smooth with power all I can say is “Thanks Pressertech” !!!!!!!!!
From interior to exterior to high performance - everything you need for your Stinger awaits you...
Not Here Anymore
Stinger Enthusiast
This is what I now have for numbers from today’s DynoCom run !
330 whp and 406 ft lbs torque
different for sure and I just got back from the Dyno run , much lower and it was only run in 4th gear runs here
330 whp and 406 ft lbs torque
Tonkabob
2500 Posts Club!
Is this a different dyno from last year?
Not Here Anymore
Stinger Enthusiast
The one thing is that 0to 60 times are almost the same as with the piggy back lol but the tune whp keeps going to up to 6 k before dropping off which is great
Last edited:
Not Here Anymore
Stinger Enthusiast
Yeah both last year were Dyno com s and this run was from one for that I run on before /(
______________________________
From interior to exterior to high performance - everything you need for your Stinger awaits you...
Not Here Anymore
Stinger Enthusiast
I ask to have it run in 5 th gear but still this Dyno has a speed limit that must be stayed at , so 4 th was the only gear used which showed a speed once of 188 mph lol
Not Here Anymore
Stinger Enthusiast
This was my 1/8 mile run earlier this morning at 8.38 sec on Dragy 
Not Here Anymore
Stinger Enthusiast
The other DynoCom I was going to use is waiting for a part to arriveThis was my 1/8 mile run earlier this morning at 8.38 sec on Dragy
but I am going to get a data log done then as well techguy888
Member
I don't mean to rain on anyone's parade but...
8.38 1/8 mile is close to stock performance. You either have a serious bottleneck, or the least aggressive tune ever. I mean, the 0-60 time is literally the manufacturer's quoted time.
The slowest 1/8 mile in the official track times thread is a full half second faster:
Drag/Acceleration - The Official 1/4 mile track thread.
8.38 1/8 mile is close to stock performance. You either have a serious bottleneck, or the least aggressive tune ever. I mean, the 0-60 time is literally the manufacturer's quoted time.
The slowest 1/8 mile in the official track times thread is a full half second faster:
Drag/Acceleration - The Official 1/4 mile track thread.
From interior to exterior to high performance - everything you need for your Stinger awaits you...
This is what I now have for numbers from today’s DynoCom run !View attachment 38999 View attachment 38998
different for sure and I just got back from the Dyno run , much lower and it was only run in 4th gear runs here
none of this makes any sense.
those dyno screen shots are from 4/4/2019.
those are stock numbers.
______________________________
techguy888
Member
To me it looks like his ECU has been flashed with the wrong tune.
he must of posted the stock dyno run from last year.
I have this tune and is far and away better than stock.
Not Here Anymore
Stinger Enthusiast
Yeah I am not sure what the problem is with tunes for this car lol
why does the dyno have 4/4/2019 date?
From interior to exterior to high performance - everything you need for your Stinger awaits you...
