Group Buy - ISG (Idle Stop and Go)/Auto Hold, Proximity Lock/Unlock, Heat/Cool setting memory module
- Thread starter jellyman
- Start date
Make sure your wires are connected according to install doc from SR or see if 
David Truax
Active Member
Part of the problem is that my taps weren't tight. Got it to lock, but won't unlock when I walk back lol
jellyman
Active Member
Is you welcome setting turned on? It should unlock when the mirrors fold out. Also make sure "double press" lock setting is disabled in center console as well.
______________________________
David Truax
Active Member
I think the welcome setting is turned on....
David Truax
Active Member
That worked.... thanks. Now I gotta put it all back together
From interior to exterior to high performance - everything you need for your Stinger awaits you...
David Truax
Active Member
Anyone have an issue with the auto start/stop not working after installing the proximity lock/unlock module from shark racing? I noticed mine does not kick on now after installing the module. I just get the yellow icon on the dash. Not that I mind really. Just curious
jellyman
Active Member
I have no issues with auto start/stop, but I have a ISG module installed. It works as it should. I would check wiring. If anything is draining your battery low enough, your ISG will not work either.
Gtecko
Stinger Enthusiast
the more I read on this thread the less those module are attractive ...
David Truax
Active Member
I suppose the proximity module might be draining just enough for the isog to not work.... but even after driving awile where the battery should be charging, it still doesn't seem to work.
jellyman
Active Member
You might want to put a charger to it just to be sure. I've read driving around merely maintains the battery and doesn't charge enough.
______________________________
From interior to exterior to high performance - everything you need for your Stinger awaits you...
modules are available in gmarket at half the price.
mg.gmarket.co.kr
However, Here is my experience of installing Proximity Module and Heated and Cooled Seats Memory.
I used Posi-tap 2022m for installation
Proximity Smart Door Lock Module
1
2
3
Remove the cap from the blue cable
4
5
Remove the OBD port
6
Done.
Notes.:
2 led lights on the module means successfully connected.
Now make sure to enabled Welcom in cluster settings.
To enable or disable the module press 4 times on trunk button when the engine is off.
검색결과: 스팅어 모듈 - G마켓 모바일
However, Here is my experience of installing Proximity Module and Heated and Cooled Seats Memory.
I used Posi-tap 2022m for installation
Proximity Smart Door Lock Module
1
2
3
Remove the cap from the blue cable
4
5
Remove the OBD port
6
Done.
Notes.:
2 led lights on the module means successfully connected.
Now make sure to enabled Welcom in cluster settings.
To enable or disable the module press 4 times on trunk button when the engine is off.
Last edited:
David Truax
Active Member
Are any of those on Gmarket the one for drive mode memory?
Nice! You understand Korean! Maybe I should get one and test out whether it's really a faulty module (the one I got from Sharkracing) or the RHD wiring is different from LHD, hence not working as it should.
From interior to exterior to high performance - everything you need for your Stinger awaits you...
There is in the Connector B of Smart Key Unit Under the Glove Box Housing, but I'm not sure if it same with your RHD stinger.
More info. Here
______________________________
This one will do the trick
Auto hold/ISG/drive mode memory module (V2.1)
오토홀드/ISG/드라이브모드 메모리모듈(V2.1)
Last edited:
David Truax
Active Member
Not sure they ship to US.
What ever happened to the guy on here that was developing his own?
Disable ISG (Idle Stop and Go) and enable Sport mode on each start up for under $20 - JB4tech.com - International Turbo Tuning Discussion
Disable ISG (Idle Stop and Go) and enable Sport mode on each start up for under $20 Kia & Hyundai Turbo
www.n54tech.com
From interior to exterior to high performance - everything you need for your Stinger awaits you...
