Jays_stinger
Active Member
Last question I think.. So from the T adapter the hose connected to the far right is going to you boost gauge?
3.3TT Boost gauge install
- Thread starter StingerGTT
- Start date
Last question I think.. So from the T adapter the hose connected to the far right is going to you boost gauge?
StingerGTT
Active Member
- Joined
- Mar 21, 2018
- Messages
- 185
- Reaction score
- 83
- Points
- 28
Yes sir far right I’m pointing to goes to gauge . That’s the best angle there sometimes I amaze myself taking pix lol no problem either like I said ya got me out here lol
Jays_stinger
Active Member
Yes sir far right I’m pointing to goes to gauge . That’s the best angle there sometimes I amaze myself taking pix lol no problem either like I said ya got me out here lol
Perfect Thanks for all the help. I will post up a pic when I install mine this week.
Was going to install my ipad in my car and pay for a Bluetooth set up for multiple gauges.. But the reviews changed my mind on the App...
______________________________
StingerGTT
Active Member
- Joined
- Mar 21, 2018
- Messages
- 185
- Reaction score
- 83
- Points
- 28
Nothing will ever compare to a direct manual reading ever. You can have all the apps one wants or all the blueteeth lol u want but they have glitches and problem manual will never hardly ever fail. Good luck need anything else just ask!! Post urs when your done I wanna see it !
Jays_stinger
Active Member
From interior to exterior to high performance - everything you need for your Stinger awaits you...
bumble bee
1000 Posts Club!
Mine just plugs into computer of car. Ya know under fuse box. Reads everything a to z.
Jays_stinger
Active Member
Jays_stinger
Active Member
StingerGTT
Active Member
- Joined
- Mar 21, 2018
- Messages
- 185
- Reaction score
- 83
- Points
- 28
.9 bar 12 13ish psi yours jay ?
Jays_stinger
Active Member
@StingerGTT
Max boost 13 or 14 psi from what can see doesn' pass 15 forsure though...
Engine noise sounds a bit louder than before I think not sure if its Just me lol
Max boost 13 or 14 psi from what can see doesn' pass 15 forsure though...
Engine noise sounds a bit louder than before I think not sure if its Just me lol
______________________________
From interior to exterior to high performance - everything you need for your Stinger awaits you...
StingerGTT
Active Member
- Joined
- Mar 21, 2018
- Messages
- 185
- Reaction score
- 83
- Points
- 28
13psi sounds about right and I think its just you wanting an exhaust next lol no engine noise should come from a boost gauge install not any extra anyways.
StingerGTT
Active Member
- Joined
- Mar 21, 2018
- Messages
- 185
- Reaction score
- 83
- Points
- 28
I like it !! looks good how did you mount it? if you drilled into the dash I commend you my balls aren't that big! lol wasn't running the line threw the firewall a BLAST !!
Jays_stinger
Active Member
@StingerGTT
For some reason not sure why I feel some type of lag of throttle response. (Making the engine push its self A little harder thus making it a bit louder? Idk...)
Nope no drilling! Wouldn' dare to do that haha .
Passed the tube through side edges of the door... if you lift up the black trimmngs
Their is enough room to pass the tube behind and pass it all the way up to the edge next to the top air vent... cut a small piece if the inner tubing where the tube was going to come out of so it wouldnt squeeze the tube and stop air flow..
I was going at it with the rubber grommet for like 30mins! Ended up pulling the edge down enough so the tube could pass through.
For some reason not sure why I feel some type of lag of throttle response. (Making the engine push its self A little harder thus making it a bit louder? Idk...)
Nope no drilling! Wouldn' dare to do that haha .
Passed the tube through side edges of the door... if you lift up the black trimmngs
Their is enough room to pass the tube behind and pass it all the way up to the edge next to the top air vent... cut a small piece if the inner tubing where the tube was going to come out of so it wouldnt squeeze the tube and stop air flow..
I was going at it with the rubber grommet for like 30mins! Ended up pulling the edge down enough so the tube could pass through.
Jays_stinger
Active Member
@StingerGTT
Oh I also have a muffler delete I don' see myself spending 1,000 plus on an exhaust anytime soon.. Sounds great with a muffler delete probably just get downpipe soon .
Waiting on my I takes from Tork Motorsport. They should be here next week.
That would be a 4 week wait since oredering..
Oh I also have a muffler delete I don' see myself spending 1,000 plus on an exhaust anytime soon.. Sounds great with a muffler delete probably just get downpipe soon .
Waiting on my I takes from Tork Motorsport. They should be here next week.
That would be a 4 week wait since oredering..
bumble bee
1000 Posts Club!
From interior to exterior to high performance - everything you need for your Stinger awaits you...
bumble bee
1000 Posts Club!
jays stinger......
Hey jay you mount that gauge on pillar????? That gauge will tell you everything.
Hey jay you mount that gauge on pillar????? That gauge will tell you everything.
Last edited:
______________________________
bumble bee
1000 Posts Club!
stingergtt, plugged mine into computer under dash!
Jays_stinger
Active Member
@bumble bee
I pretty much mounted mine exacty where you have yours. I used velcro as well lol.
What do you mean that gauge will tell you everything?... Are you talking about your gauge?
I pretty much mounted mine exacty where you have yours. I used velcro as well lol.
What do you mean that gauge will tell you everything?... Are you talking about your gauge?
Jays_stinger
Active Member
Fixed my issue with feeling some throttle lag. Part of my tube was being compressed from where I ran It hrough. Feels better and gauge reads better to 
bumble bee
1000 Posts Club!
read about that gauge ane you just plug n play. Summit Racing Part Number: GBE-66560
From interior to exterior to high performance - everything you need for your Stinger awaits you...
