Rim spacers

[Larry P.]

I was originally going to add 20mm spacers all around to the oem rims, but I just bought Aodhan aff7 rims. All 4 Aodhans are +35 offset, so would it work if I got the 20mm spacers for the front and 10mm spacers for the rear?

 

[Thomby]

All 4 Aodhans are +35 offset

How wide are they? If they match stock (8" front, 8.5" rear), then your fronts are basically unchanged (stock +34), but rears are 11.5mm further out (stock +46.5), so a 20mm front & 10mm rear spacer is perfect.

 

[Larry P.]

How wide are they? If they match stock (8" front, 8.5" rear), then your fronts are basically unchanged (stock +34), but rears are 11.5mm further out (stock +46.5), so a 20mm front & 10mm rear spacer is perfect.

They are 8.5” front and 9.5” rear.

 

[Snicklefritz]

They are 8.5” front and 9.5” rear.

I wouldn't change a thing. Your wheels are as wide as mine, and my offsets are front 40, rear 39, so, you are pushing flush more than I am.

 

[Larry P.]

I wouldn't change a thing. Your wheels are as wide as mine, and my offsets are front 40, rear 39, so, you are pushing flush more than I am.
View attachment 92191

This helps a lot. Now if I were to go the spacers route, what mm would you recommend? I’m debating on hub centric rings, but I do like some poke from spacers.

 

[Thomby]

This helps a lot. Now if I were to go the spacers route, what mm would you recommend?

Front stock is 8" +34, and a 20mm spacer (reducing offset to +14) looks flush without going crazy, to me. Your 8.5" +35 adds a 1/2" width (1/4" or 6.3mm inside & out), at 1mm higher offset, ie the outer face will be ~5mm further out. So a 20mm spacer should be fine.

Rear stock is 8.5" +46.5, and a 20mm spacer drops it to +26.5 and looks flush to me. Your 9.5" +35 adds 1" width (1/2" or 12.7mm inside & out), then shifts the wheel out another 11.5mm (almost 1/2"). Outer face will be 24mm or almost 1" further out than stock, so I would not add any spacer.

 

[Larry P.]

Front stock is 8" +34, and a 20mm spacer (reducing offset to +14) looks flush without going crazy, to me. Your 8.5" +35 adds a 1/2" width (1/4" or 6.3mm inside & out), at 1mm higher offset, ie the outer face will be ~5mm further out. So a 20mm spacer should be fine.

Rear stock is 8.5" +46.5, and a 20mm spacer drops it to +26.5 and looks flush to me. Your 9.5" +35 adds 1" width (1/2" or 12.7mm inside & out), then shifts the wheel out another 11.5mm (almost 1/2"). Outer face will be 24mm or almost 1" further out than stock, so I would not add any spacer.

Thank you. I will get 20mm hubcentric spacers for the front and hubcentric rings for the rear.