VMR V701 Wheels on Ceramic Silver RWD Stinger GT2

[Cobrajetguy]

Thought you guys might like to see my new setup, I ran VMR wheels on my Optima and they are great quality and never went out of round.

This is a set of their V701 wheels in 19x8.5 front 19x9.5 rear, I had them custom powdercoated a matte dark blue and I think they turned out great and really works well with the Ceramic Silver. I'm running a 245 35 19 on the front and a 275 30 19 on the rear, thinking I can go 10mm wider on the next set of tires but these fit great and no rubbing even with the Eibach lowering springs on the car.

They have other styles that fit our cars, you can check them out at vmrwheels.com
I am not affiliated with them in any way, just really like how my car turned out and looking to help out the community.

 

[Waynerm002]

Nice setup! Love the Ceramic Silver color and the blue on those wheels looks so nice!

 

[Billy M]

Duuuuude

 

[Never thought]

Looks great!

 

[Eugene Onegin]

Yep,I'm Diggin' it.

 

[Bosander]

on vmrwheels.eu not one wheel with a 5x114,3 PCD. You do get the following on that site: "Welcome to VMR Wheels - the leading manufacturer for Performance Luxury Alloys for European Sports Cars from Audi, BMW and Volkswagen."
No wheels for Kia Stingers on VMR Europe... even though your pictures are on the VMR website http://velocitymotoring.com/wheels/v701/

 

[Socalstinga]

Thought you guys might like to see my new setup, I ran VMR wheels on my Optima and they are great quality and never went out of round.

This is a set of their V701 wheels in 19x8.5 front 19x9.5 rear, I had them custom powdercoated a matte dark blue and I think they turned out great and really works well with the Ceramic Silver. I'm running a 245 35 19 on the front and a 275 30 19 on the rear, thinking I can go 10mm wider on the next set of tires but these fit great and no rubbing even with the Eibach lowering springs on the car.

They have other styles that fit our cars, you can check them out at vmrwheels.com
I am not affiliated with them in any way, just really like how my car turned out and looking to help out the community.

Nice set up... just curious what are the offsets? That’s the same set up I had on a previous Gsedan and was going to do the same on the stinger... just can’t decide on the offset that will not run or have turn radius issues

 

[RVance]

Is there a speedo issue with the difference in diameter, if any?

 

[Thang]

@Cobrajetguy nice ride! Wheels look great. I’m in Colorado as well.

 

[Chowder]

Always liked those wheels! Clean!

 

[Cobrajetguy]

on vmrwheels.eu not one wheel with a 5x114,3 PCD. You do get the following on that site: "Welcome to VMR Wheels - the leading manufacturer for Performance Luxury Alloys for European Sports Cars from Audi, BMW and Volkswagen."
No wheels for Kia Stingers on VMR Europe... even though your pictures are on the VMR website

You may just have to email them and ask, typically they don't have car fitments listed on their website. I had their wheels on my Optima as well and those are 5x114.3 too.

 

[EBdiesel08]

Thought you guys might like to see my new setup, I ran VMR wheels on my Optima and they are great quality and never went out of round.

This is a set of their V701 wheels in 19x8.5 front 19x9.5 rear, I had them custom powdercoated a matte dark blue and I think they turned out great and really works well with the Ceramic Silver. I'm running a 245 35 19 on the front and a 275 30 19 on the rear, thinking I can go 10mm wider on the next set of tires but these fit great and no rubbing even with the Eibach lowering springs on the car.

They have other styles that fit our cars, you can check them out at vmrwheels.com
I am not affiliated with them in any way, just really like how my car turned out and looking to help out the community.

What is powder coated? And how much do they cost? Nice setup I hav ceramic silver also