Track/Course Stinger jb4 e85 BEF wont start

[Crazy-Stinger]

Hey man i need help hope u can get this message is urgent i cant contact sxth

But i flash my car with
JB4 E85 BEF
After that car wont start
I download the stock map
And flash it now still wont start
I dont know i hope i did not brick my ecu bu i did all the instructions just when i put back to stock still wont start.

There is a ecu patch file on sxth web, but it did not tell me to do that part

Also did all steps on the sxth web and i was very carefull

 

[mariangt82]

You need to fill out your account on the SXTH page carefully (VIN, ECU id, EK1 number…)
-update device.
-read out your ECU id
-find patch for your id
-patch with the correct id patch
-flash your ECU with the correct id flash

 

[Crazy-Stinger]

I did all of that, but the problem is i reflash it with out the patch, but i follow all 14 steps from sxth website and does not says anything about a ecu patch their instruction is missing info, how would i know that step is very important it dont say i should do the patch first, now i tried flashing it with the exu patch it wont even let menit keep showing error message. Here picture attach thats the error msg i get even the car is on start position, i dont know what to do

 

[mariangt82]

Check your VIN and ECU id in your profile at SXTH page

If they are correct:
Download patch abd try patching it.

If it still wont let you, try flash it with id matching „original“ map

 

[Crazy-Stinger]

I did all of that and email sxth nathan, i match everything it wont even let write a patch it keep showing that error message while perdorming a patch, its funny still able to flash it back to stock no problem, but it wont let me read the ID or the ECU or flash a patch, im lost he stop replying

 

[djerickd]

you fix it>?

 

[Crazy-Stinger]

you fix it>?

No.. nathan send me a recovery file to flash it in my car, i was able to flash it successfuly but when i attemp to start the car, same problem wont start

 

[djerickd]

Aww man

 

[Crazy-Stinger]

I thi

Aww man

I Think its gonna end up sending them my ecu to get it check

 

[mariangt82]

Try flashing with another ID „original“ map.
For Example „CKHK3TMS2C7C“
Than patch with this ID patch. (CKHK3TMS2C7C)
Try to start the car.
If it starts with no codes you either good to go for this id jb4 BEF or will be able to flash back to your original id cause your ECU is patched than.

This is how i got my buddies car running where it was close to your problem.

*keep in mind that your battery will drain soon when flashing that much. So better hook it up to a charger*

 

[Crazy-Stinger]

Try flashing with another ID „original“ map.
For Example „CKHK3TMS2C7C“
Than patch with this ID patch. (CKHK3TMS2C7C)
Try to start the car.
If it starts with no codes you either good to go for this id jb4 BEF or will be able to flash back to your original id cause your ECU is patched than.

This is how i got my buddies car running where it was close to your problem.

*keep in mind that your battery will drain soon when flashing that much. So better hook it up to a charger*

I dont know where to get another flash file, the problem probably occur when i flash the car before the patch, so probably security thing from kia that lock my ecu

 

[mariangt82]

You just need to enter the other ECU id in your profile and than it will show the new files

 

[Crazy-Stinger]

You just need to enter the other ECU id in your profile and than it will show the new files

U know im afraid to try anything right now i apreciate ur help, but tell me first how did ur buddy end up with his issue? If if the same error i did then i will try it

 

[mariangt82]

Same error as yours and even a lil more shit.
I told Nathan my workaround too and how i solved it.
You can give it a try or ask Nathan first if you can do it like i did.

See, you already are at the worst case scenario where your flash doesnt match your VIN and so on…

 

[G-967410]

Same error as yours and even a lil more shit.
I told Nathan my workaround too and hoe i solved it.
You can give it a try or ask Nathan first if you can do it like i did.

See, you already are at the worst case scenario where your flash doesnt match your VIN and so on…

so did you guys patch the ecu before doing the BEF?
its tough to communicate with nathan right now he just stop replying

 

[mariangt82]

You always need to read out your ECU Id and need to patch first!

 

[mariangt82]

You need to fill out your account on the SXTH page carefully (VIN, ECU id, EK1 number…)
-update device.
-read out your ECU id
-find patch for your id
-patch with the correct id patch
-flash your ECU with the correct id flash

this

 

[CHUPAPI]

Did you fix the issue?