3.3TT Review on the Injen Short Ram Dual Intake Kit

What were the Dyno numbers?
Before & after?
If I remember correctly it was about 20hp but it's been over 6 months ago so I don't really remember
 
Around +20, is pretty good!
 
______________________________
If I remember correctly it was about 20hp but it's been over 6 months ago so I don't really remember
Was that with a JB4 or without?
 
From interior to exterior to high performance - everything you need for your Stinger awaits you...
Was that with a JB4 or without?
Without, I did the Intake first all by intself later I added the Ark 2nd down pipes that only produced maybe 5+ hp but more sound then I added the JB4 a few months ago but have not done a dyno since then.

I have Rotors, Brakes, Brake Lines, Bigmouth Intake, Catch cans that need to be installed just no one to do it and no time.
 
Without, I did the Intake first all by intself later I added the Ark 2nd down pipes that only produced maybe 5+ hp but more sound then I added the JB4 a few months ago but have not done a dyno since then.

I have Rotors, Brakes, Brake Lines, Bigmouth Intake, Catch cans that need to be installed just no one to do it and no time.
Man, nice I would like to see that dyno.
 
U just posted that u got the JB4 but haven't dynoed yet.
 
U just posted that u got the JB4 but haven't dynoed yet.
Yes is that the dyno you want? Others have posted their Dyno's for that. The only ones I've posted are after the Injen and the Ark downpipe
 
______________________________
From interior to exterior to high performance - everything you need for your Stinger awaits you...
Others have posted but it's nice to see same car same dyno
 
Very nice review! Just got mine installed last week during Christmas. I was not expecting the sound of the turbo spooling and blow off to be so loud. I love it and my wife is now getting used to it. Lol. I have the Borla exhaust sitting in the garage waiting to be put on. I'll have to take it to a place with a lift; my ramps didn't give me enough room. :( 20191227_132738.webp
 
Very nice review! Just got mine installed last week during Christmas. I was not expecting the sound of the turbo spooling and blow off to be so loud. I love it and my wife is now getting used to it. Lol. I have the Borla exhaust sitting in the garage waiting to be put on. I'll have to take it to a place with a lift; my ramps didn't give me enough room. :( View attachment 36149
And condoms on the filters too. That’s on horny looking Stinger!:D
 
Anyone know the exact dimensions of those Injen filters?

Nevermind found it :D
 
Last edited:
I'm wondering if those heat barriers would be a mandatory addition in the hot arsed climate we have? I suppose FMIC might be required for future predictable results.
 
From interior to exterior to high performance - everything you need for your Stinger awaits you...
I'm wondering if those heat barriers would be a mandatory addition in the hot arsed climate we have? I suppose FMIC might be required for future predictable results.
I haven't seen the heat shield installed but just by looking at it, it seems like it would just restrict the air flow.
 
______________________________
Currently installing the injen intake
Not much of a mechanic and almost there but looks like I need to shave a bit off the crankcase hose.... Don't see any harm in that?
And both that hose and the vaccum line don't connect in a perfectly straight path .... Again no big deal?
Only real pita was getting a few if the OEM Hoses off!15793911919218810888552370358812.webp
 
On possible bigger concern.... Found a smidge of oil on the inside bottom lip of the driver's side turbo inlet
About the size of a dime
Should I be concerned?
Only 21k miles and stock up until today, plus I don't drive her hard at all.....
 
Currently installing the injen intake
Not much of a mechanic and almost there but looks like I need to shave a bit off the crankcase hose.... Don't see any harm in that?
And both that hose and the vaccum line don't connect in a perfectly straight path .... Again no big deal?
Only real pita was getting a few if the OEM Hoses off!View attachment 36894
I struggled a bit getting them all attached at once, but I didn't have to trim the hoses...

20200109_182346.webp
 
Shaved about 3/4 inch and driver's side good and snug
Surprisingly, passenger tube giving me a bit of a hassle lining up with the turbo but think I got it....almost
 
From interior to exterior to high performance - everything you need for your Stinger awaits you...
Back
Top