NGT Performance Throttle Body Spacer METH Injection/Nitrous/Vacuum Port - KHARTUNERZ

[NICK_KHAR]

NGT Performance

Manufactured 100% in the USA
These are hand crafted here in Southern California

Our throttle body spacer comes equipped with (3) 1/8th inch NPT threaded port extra vacuum port ,methanol, ornitrous. Includes extended bolts, plug, gasket, and is anodized for a brilliant show-quality look

Trimming of the oem coupler will be needed about 15mm each side

PURCHASE LINK
NGT Performance Kia Stinger GT Throttle Body Spacer - 3 Port
PURCHASE LINK

 

[DaBears4Lyfe]

Nice! What if you have an aluminum charge pipe is there enough room in the coupling they supplied like CX and UP

 

[NICK_KHAR]

CX Racing and Ultimate performance use an aftermarket couple so you should be okay

 

[DaBears4Lyfe]

CX Racing and Ultimate performance use an aftermarket couple so you should be okay

Awesome!

 

[NICK_KHAR]

Ofcourse just assuming so
Havent tested first hand yet

 

[djerickd]

Any gains or just a thing to add some ports?

 

[Super Stinger]

Any gains or just a thing to add some ports?

That's what I want to know!

 

[Brian B]

Any gains or just a thing to add some ports?

Im going to say that any throttle body spacer really doesn't add anything power wise for any car they are placed on. They do however provide a nice port for adding meth or nitrous like they noted.

 

[Super Stinger]

Im going to say that any throttle body spacer really doesn't add anything power wise for any car they are placed on. They do however provide a nice port for adding meth or nitrous like they noted.

Yeah that's what im thinking as well but I plan to get a stand along Water Meth kit in the near future so it will come in handy! Don't really want to drill any holes in my intake id rather keep it hidden

 

[Tim Johnson]

Anyone have experience with the install? I'm going to be adding meth soon as well. I think this is a better looking way to go versus the BMS adapter. Can this be done without removing the charge pipe, if not ill just wait until I get an inter-cooler and do it all at the same time.

 

[G-196533]

Anyone have experience with the install? I'm going to be adding meth soon as well. I think this is a better looking way to go versus the BMS adapter. Can this be done without removing the charge pipe, if not ill just wait until I get an inter-cooler and do it all at the same time.

by design and meth usage the throttle body spacer will allow more droplets to be mixed in with the fuel to boost octane since it wont have the time to evaporate, for more IAT cooling a second nozzle will need to be added away from the throttle body so that the meth will have time to evaporate to do the cooling process.

 

[Kingduke9]

Is the product sold out for the time being or is it fully discontinued? Because it says Not for sale on the Khartuners site