Drag/Acceleration Kia Stinger 0-60 MPH Times

Hey since you are almost stock, can't you just run Map 0, and close the dump valve and go run a 0-60 time of 4.9 seconds? If your car runs 4.4,to 4.6 you either have a unicorn or broken dragy. If it runs 4.8 to 5.1 your car is normal and your mods are working great - Congrats!
He has a borla exhaust still I believe.
 
Hey since you are almost stock, can't you just run Map 0, and close the dump valve and go run a 0-60 time of 4.9 seconds? If your car runs 4.4,to 4.6 you either have a unicorn or broken dragy. If it runs 4.8 to 5.1 your car is normal and your mods are working great - Congrats!
Im starting to think you want a ride.

Screenshot_20190111-173347_dragy.webp
Ran another 4 flat on the way home lil uphill too. Just for you.
 
______________________________
Im starting to think you want a ride.

View attachment 18052
Ran another 4 flat on the way home lil uphill too. Just for you.
Your map 2 run was straight 93 octane right?

Grats btw! Never meant to make you out to be a liar or anything, just seeing huge inconsistencies with my setup and trying to understand why!
 
Your map 2 run was straight 93 octane right?

Grats btw! Never meant to make you out to be a liar or anything, just seeing huge inconsistencies with my setup and trying to understand why!
that's correct map 2. There are a lot of variables, people look at mods and start doing math, it's bad math. Plug gap, fuel wires,proper installation of add ons, wheel pressure, temp, too many. At this moment I have the right combo. Also I've been drag racing cars and bikes since the late 80s. I've got a clue, many do not.
 
From interior to exterior to high performance - everything you need for your Stinger awaits you...
Your map 2 run was straight 93 octane right?

Grats btw! Never meant to make you out to be a liar or anything, just seeing huge inconsistencies with my setup and trying to understand why!

Not saying anything about stungs setup, but you should work on launch control. Yesterday I couldnt get under 5 seconds in 3 pulls today with a decent launch in the 4.6s just keep working on your driving first.
 
Last edited:
You're in Morrisville, right? What street are you using as your "track" ?
I was doing the back roads through an office park at night so nobody would be around and relatively straight roads. Carrington Mill Blvd

Bunch of large parking lots back there too.
 
Im starting to think you want a ride.

View attachment 18052
Ran another 4 flat on the way home lil uphill too. Just for you.
Yeah that would be fun but I'm west coast. Blitz is testing my dragy. He says its legit.
that's correct map 2. There are a lot of variables, people look at mods and start doing math, it's bad math. Plug gap, fuel wires,proper installation of add ons, wheel pressure, temp, too many. At this moment I have the right combo. Also I've been drag racing cars and bikes since the late 80s. I've got a clue, many do not.
I find it brain dead easy with the awd. LC and go. Any tire pressure, variety of temps, road a little wet and rip out 3.7s 3.8s 3.9s, 4.0s
Screenshot_2019-01-11-18-57-15.webp Screenshot_2019-01-11-18-57-06.webp
 
Yeah that would be fun but I'm west coast. Blitz is testing my dragy. He says its legit.

I find it brain dead easy with the awd. LC and go. Any tire pressure, variety of temps, road a little wet and rip out 3.7s 3.8s 3.9s, 4.0s
View attachment 18068 View attachment 18069
for you sure, the avg joe just buying go fast promises not so much, thus the discrepancy. Good to know were in the same ballpark. Get ready to....

20181104_164228.webp
 
From interior to exterior to high performance - everything you need for your Stinger awaits you...
F8691135-8D0B-440D-AC4F-85D104FB7402.webp This is not a draggy but from the jb4 app on map 3 with full tank of gas and cold mostly dry roads. Car pulls very hard with new firmware.

Edit mod list
2018 awd limited
Jun mid pipe
Jun evc (open)
E30 mix full tank
Jb4 fuel wires Map 3 v8
K&n panel filters
Stock plugs gapped .024
Oem 19 with oem summer tires

Video of one of my runs

 
Last edited:
View attachment 18122 This is not a draggy but from the jb4 app on map 3 with full tank of gas and cold mostly dry roads. Car pulls very hard with new firmware.

Edit mod list
2018 awd limited
Jun mid pipe
Jun evc (open)
E30 mix full tank
Jb4 fuel wires Map 3 v8
K&n panel filters
Stock plugs gapped .024
Oem 19 with oem summer tires

Video of one of my runs


The time on the jb4 wouldnt be very accurate.
 
View attachment 18122 This is not a draggy but from the jb4 app on map 3 with full tank of gas and cold mostly dry roads. Car pulls very hard with new firmware.

Edit mod list
2018 awd limited
Jun mid pipe
Jun evc (open)
E30 mix full tank
Jb4 fuel wires Map 3 v8
K&n panel filters
Stock plugs gapped .024
Oem 19 with oem summer tires

Video of one of my runs


Are you using IOS? My app looks nothing like that.
 
The time on the jb4 wouldnt be very accurate.
No prob not but I still like it haha. I’m staying away from getting a draggy. My car would probably get impounded the first week of getting it.
 
From interior to exterior to high performance - everything you need for your Stinger awaits you...
No prob not but I still like it haha. I’m staying away from getting a draggy. My car would probably get impounded the first week of getting it.
Try to borrow one for a day. That way you know what you got and won't get addicted! :)
 
1-12-19 #5 @ ScottyCole improved his time

0-60 in:

1. 3.78 seconds, 188.95 feet, -.67% slope @Tonkabob,
GT2 AWD, Tork ECU tune, Ark catback, JT intake, Ultimate FMIC. 92 octane + lucas

2. 3.96 seconds, 195.11 feet, +.17% slope @Get Stung
AWD, JB4 Map3, Secondary CAT bypass, Borla catback, 93 octane

3. 4.04 seconds, 201.83 feet, -.49% slope @KLR STINGER
AWD, JB4 map2, Intakes, Velossa snorkels, Magnaflow Catback, JT FMIC, Lap3 primary dp, JunBl Mid (no cats), Magnaflow Catback

4. 4.06 seconds, 193.21 feet, -.17 slope, @Terry@BMS
GT RWD, JB4, BMS intake, Water/Methanol injection 50/50, Drag radials, wheels.

5. 4.42 seconds, 215.94 feet, +.1.67 slope @ ScottyCole
AWD, K&N Intakes, Borla Catback, 93 octane

6. 4.63 Seconds, 216ft, +.615 slope, @DaBears4Lyfe
Intake, dump valves

7. 4.64 seconds, 223.29 feet, +.29 slope, @washguy "Wash"
RWD, JB4, K&N Drop ins

8. 4.68 seconds, 228 feet, + 2.99 slope, @CFLGT2AWDSting
JB4 map2 K&N drop ins Ark catback

9. 4.83 seconds, 237.52 feet, +.83 slope, @Ahawk
Stock

10. 4.91 seconds, 73.01 M (239.53 feet), +2.19 slope, @Daniel Egan
RWD stock
 
Are we doing Dragy verified only? Probably best, I'll have to find a better spot!
 

Attachments

  • IMG_5031.webp
    IMG_5031.webp
    44.9 KB · Views: 40
From interior to exterior to high performance - everything you need for your Stinger awaits you...
Back
Top