Guess My WHP/WTQ Numbers

twelvexes

Active Member
Joined
Jun 8, 2019
Messages
122
Reaction score
55
Points
28
What do you think my whp/wtq numbers are (should be) with the mods below.

2019 3.3 GT AWD

Mods:
  • Injen Intakes
  • Magnaflow Exhaust
  • Ark Performance Secondary Downpipes
  • WMI Kit (Upgraded Lines, BM10 Injection Nozzle)
  • Mishimoto Intercooler
  • HKS Plugs
  • ECU Dyno Tune For 93 Octane
  • JB4 Tune for WMI
  • JB4 EWG Add On Connectors
~ I'll reveal the actual numbers after getting your thoughts! ;)
 
Last edited:
Should be more than stock. How much? Impossible to tell without before and after dyno test.
 
Should be more than stock. How much? Impossible to tell without before and after dyno test.
i'll give you a hint, after only these 3 mods, Injen Intakes, Magnaflow Exhaust & HKS Plugs, it dyno’d...

338 whp
362 wtq

...where would you guess it landed once everything else was done?
 
From interior to exterior to high performance - everything you need for your Stinger awaits you...
460-470hp is my guess. 🙂
 
I’ll guess 443 and 472. I’ll also say, depending on what map you are running in on the JB4.
 
thanks to everyone who guessed!

the average guess was 457whp/481wtq

and my numbers are...
425whp/503wtq

i've always felt my whp numbers were low and knew my wtq numbers were good. your input basically supports this. :)
 
That's with wmi spraying? Interesting. I guess there are many factors to dyno runs. Ambient temps being one, tune, fueling ect. I was kinda expecting a bit more with wmi since you likely don't have e85 available. Is it a custom ecu tune?

I recently went from jb4 map 3 with fuel/ewg wires to KJT's e30 tune + bms tcu and the difference in power is pretty nuts.
 
From interior to exterior to high performance - everything you need for your Stinger awaits you...
Kia Stinger
Back
Top