Rims with 3-4in lip. Anybody?

Angeski

Active Member
Joined
Jun 6, 2018
Messages
244
Reaction score
44
Points
28
I search a little bit for staggered rim sets but i didnt see any with bigger chrome lip on the rear tires. If there is a thread for this, please direct me to that. I love the staggered rims on the rear wheel drive cars. Almost makes me wonder if anyone out there is doing the extreme and "tubbing" the rear. Either way, i'm looking to see if anyone has a rim setup with 3-4in lip on the rears and 1in lip in the front like this.
 

Attachments

  • bmw-polished-lip-wheels.webp
    bmw-polished-lip-wheels.webp
    23.7 KB · Views: 62
The bolt pattern is a standard 5x114 so there are plenty of wheels that would fit with a deep lip. It’s just a matter of finding the right offset.

I haven’t seen anyone run a deep lip set of wheels yet but it’s still early in the game. Very few people are even running aftermarket wheels at this point.

Same for Tubbing the rear, not really much of a need at this point because no one is making the power necessary to need it. As for as doing it “because” again it’s still early. Also I’m not sure if tubbing a unibody car is even possible.
 
ok. I figured i was asking too early. Ill have to check out some offsets then for starts. I don't care for the rims sticking out of the tire too much and also don't like the tires sticking out from the car really either. Im more of a flush guy. Thank you for tips .
 
______________________________
At most, I can see a 3" to 3.5" lip on the rear with the sizes we need for the Stinger with a set of custom Avant Garde forged 3 piece wheels.

_DSC8377.jpg
 
Yea, 4in was just a range. That looks good. I like that set up. But those look like two different size rims. I'm not against that option either. Thanks for the pic
 
From interior to exterior to high performance - everything you need for your Stinger awaits you...
At most, I can see a 3" to 3.5" lip on the rear with the sizes we need for the Stinger with a set of custom Avant Garde forged 3 piece wheels.

_DSC8377.jpg
I know this may sound silly, but do you happen to know what the smallest wheel diameter is that would fit a 2.0 Stinger?
 
I know this may sound silly, but do you happen to know what the smallest wheel diameter is that would fit a 2.0 Stinger?

What size is the spare? That’s probably going to be close to the smallest.
 
i do like that look. the back sticks out a little more than i want but it all comes together pretty nice. thanks for posting that. Ill have to do some research on those rims to see the numbers
 
From interior to exterior to high performance - everything you need for your Stinger awaits you...
Back
Top