[VENDOR][FS]: Kia Stinger - H&R Sport Lowering Springs - K8 Stinger Store

[Daniel @ K8 Stinger Store]

Is proud to present to the Stinger community:

H&R Sport Lowering Springs

(BUY NOW)

Description:
Lowering the vehicle’s center of gravity improves handling and creates a sleek European stance – Wunderbar!
H&R Sport Springs are cold-wound, then time-tempered and shot-peened inside and out to maximize service life, for miles of smiles!
H&R's ride development engineers noticed the potential of this new vehicle and designed H&R Sport Springs specifically for the new Kia Stinger.
The Sport Springs tighten the suspension and provide superb ride quality, which makes this car a real challenger to established European contenders.
Like all of H&R’s products, H&R Sport Springs are 100% made in Germany and use inductively tempered spring steel for unparalleled tensile strength and resiliency, allowing the use of a smaller wire diameter for reduced unsprung weight.

Features and Specifications:
Lower center of gravity
Stop quicker and corner faster
Includes (1) set of 4 lowering springs
Drop Height: Front = 1.3"/Rear = 1.2"
Better performing progressive spring rates

Vehicle Application:
2018-2023 Kia Stinger (All Models)

THANK YOU FOR LOOKING!​

 

[Daniel @ K8 Stinger Store]

Hey Guys,

If you were looking for a great lowering spring for your Base or GT at an insane deal, our End of the Year SALE is right around the corner. The H&R lowering springs get rid of the factory wheel gap and stiffen up the Stinger's relaxed suspension. Lowering springs are a great way to change the look of your vehicle without breaking the bank. Your car will instantly look more sporty, aggressive, and expensive. If you have any questions at all about the H&R lowering springs please reach out and I can help answer those with you.

Hope you had a great holiday,
Daniel​

 

[turboAWD]

When does the sale start?

 

[K8 Stinger Store]

When does the sale start?

Starts on Friday the 27th at 5pm (Pacific Standard Time/8pm Eastern Stanard Time)

 

[turboAWD]

How do these compare to Ark GT-F? About the same drop on AWD?

 

[Daniel @ K8 Stinger Store]

How do these compare to Ark GT-F? About the same drop on AWD?

That's a great question TurboAWD!
Many people just like you, will cross-shop these two options for the Stinger since they are very close in price and popularity. Both companies make reliable products that are engineered specifically for your vehicle but in terms of ride height drop, they do differ slightly. The Ark GT-F Lowering Springs sits a little bit higher. Ark Performance specifications show a drop of 1.15 in the front and 1 inch in the rear while the H&R springs sit a little bit lower at 1.3 inches in the front and 1.2 inches in the back. It might seem that .2 or .3 inches wold be insignificant but in fact, it does change the appearance and performance of the vehicle. This will depend on what your suspension preferences are and your road conditions.

We currently have both of these options offered at the lowest possible available (our price even beats the manufacturer's website!) especially when you include free shipping in the continental United States. Also, everyone here at the K8 Stinger Store is solely focused on making your purchase as easy and enjoyable as possible and we are available by phone during our normal business hours or you can send me an email or message any time and I would be glad to help you out.​

 

[turboAWD]

Thanks Daniel - is there any data on the spring rates? Which is considered "sportier"?

 

[Daniel @ K8 Stinger Store]

Thanks Daniel - is there any data on the spring rates? Which is considered "sportier"?

I dont have any of that data available. I personally would go with the H&R because of the lower drop. I dont feel like an inch is significant enough because of how bad the factory wheel gap is. A lower center of gravity will always feel much sportier as well.

 

[mhal8876]

Question is this for the RWD or AWD?

 

[Daniel @ K8 Stinger Store]

Question is this for the RWD or AWD?

These lowering springs fit all Stinger models. Please keep in mind this is not the RWD specific springs as those are not offered to vendors here in the United States yet.

 

[JoeBuck]

Hey Guys,

If you were looking for a great lowering spring for your Base or GT at an insane deal, our End of the Year SALE is right around the corner. The H&R lowering springs get rid of the factory wheel gap and stiffen up the Stinger's relaxed suspension. Lowering springs are a great way to change the look of your vehicle without breaking the bank. Your car will instantly look more sporty, aggressive, and expensive. If you have any questions at all about the H&R lowering springs please reach out and I can help answer those with you.

Hope you had a great holiday,
Daniel​

How about a “Build back Broke” sale here for 2022! We’re having to stretch our $$$ a lot further theses days.

 

[Daniel @ K8 Stinger Store]

Need a better look and feel to your Kia Stinger.

Get these world-class performance H&R lowering springs now for your Kia Stinger 2.0T or 3.3TT.

H&R is known for the quality & durability of its suspension products and they easily outperform cheaper opponents.

These lowering springs will instantly provide a lower more sporty stance and help your Stinger cut through the corners like butter.

Feel free to reach out to any member of our team if you have any questions at all!

(CLICK THE IMAGE BELOW TO MAKE A PURCHASE OR TO FIND MORE INFORMATION)
​