Rear Emblem Replacement - Any options with the pegs?

[jatleson]

Are there any rear emblem replacement options that use the holes from the OEM KIA badge? Not looking for covers that go over the OEM, true emblem replacements. The front emblems have the pegs to align with the factory holes.

 

[westcoastGT]

Are there any rear emblem replacement options that use the holes from the OEM KIA badge? Not looking for covers that go over the OEM, true emblem replacements. The front emblems have the pegs to align with the factory holes.

the E badge will work but the pegs arent exactly the same , just cut them off

 

[zmanelite]

I used dry eraser marker to mock up exactly where the old logo went

Id post pics but apparently im a noob and cant post pics yet

 

[DiabloStinger]

n00b!! Haha

 

[ballistic]

Are there any rear emblem replacement options that use the holes from the OEM KIA badge? Not looking for covers that go over the OEM, true emblem replacements. The front emblems have the pegs to align with the factory holes.

there are not. what do you need the pegs for?

 

[jatleson]

there are not. what do you need the pegs for?

Easier alignment and more secure adhesion. Not mandatory, but it would be nice.

 

[eflyguy]

Pegs don't make them more secure. Alignment is simple with a bit of painters tape or, as stated, dry erase markers.

 

[Doel]

Pegs don't make them more secure. Alignment is simple with a bit of painters tape or, as stated, dry erase markers.

also keep in mind that if you're using the Stinger script on the back, it will not be perfectly centered because you have to use the letters to cover the holes, you can't tell by looking at it though.

 

[CFL Stinger]

My choice was the E badge for the front and back.

 

[jatleson]

My choice was the E badge for the front and back.

That is the route I'll likely do. Did you use OEM for both front and back with the needed pegs removed?

 

[CFL Stinger]

That is the route I'll likely do. Did you use OEM for both front and back with the needed pegs removed?

I used the OEM with pegs to help the alignment on the front and without it on the back with painter blue tape to help me align it.

 

[gilthanis1]

Went with the black, dark chrome flying K emblems on mine. I like the E badges, but wanted something that matched with the car better.

They were completely flat, which was fine for me. Like others have said, use painters tape or dry erase marker to make small spots to re-align.

[photo=medium]2030[/photo]
[photo=medium]2027[/photo]