Front Splitter

[Jacques]

Yes. I put a bolt through each "nub" on the splitter.

Thanks, I figured as such. I need to make some holes for those as well. Maybe, just maybe, I might block some time to install it this weekend.

 

[DGambit]

Thanks, no they are not Niche, they are Koya SF04.

I’m an idiot lol it’s right in your description I somehow missed it ‍

 

[Jacques]

I finally got around to putting the splitter (V1) on this past weekend. The nubs I ended up dremeling large holes because I couldn't line them up to the holes on the bumper cover. They look ghetto if you look underneath, but you won't ordinarily see them anyways, sooo. I didn't use any double-sided tape, no gaps that I see. After installing it, I went to a Stinger cruise and it held just fine.

Now that I have the Maxton front splitter and rear spoiler, I want to put some kind of sideskirts. I'm leaning towards M&S and painting it glossy black. I don't like the Maxton version as much.

 

[cncBilly]

I finally got around to putting the splitter (V1) on this past weekend. The nubs I ended up dremeling large holes because I couldn't line them up to the holes on the bumper cover. They look ghetto if you look underneath, but you won't ordinarily see them anyways, sooo. I didn't use any double-sided tape, no gaps that I see. After installing it, I went to a Stinger cruise and it held just fine.
View attachment 41125
Now that I have the Maxton front splitter and rear spoiler, I want to put some kind of sideskirts. I'm leaning towards M&S and painting it glossy black. I don't like the Maxton version as much.

Looks really nice Jacques. Sideskirts ya say ah. Another classic example of "It's Never Finshed". Keep er going I'm keen to follow.

 

[Hockster]

I just ordered the V2, rear valance and rear winglets from Maxton.

 

[SKStinger]

I just ordered the V2, rear valance and rear winglets from Maxton.

Where did you order from? I just ordered the V2 from the UK site as it’s quite a bit cheaper than the Canadian or US one and no published wait.

 

[Hockster]

I got the splitter and wings from the Canadian site, valance from US. I might cancel the CDN order though. The valance was shipped first thing this morning, and got a nice message saying they refunded me $27 US on shipping as the actual cost was less than the estimate. Canadian items haven't even had a label created yet. It's actually cheaper for me to get them out of the US.

 

[Drudge]

If only they offered one with carbon fiber look.

 

[SKStinger]

If only they offered one with carbon fiber look.

They do. Comes in three finishes including carbon look. It’s just not in stock on the US site.

 

[SKStinger]

I got the splitter and wings from the Canadian site, valance from US. I might cancel the CDN order though. The valance was shipped first thing this morning, and got a nice message saying they refunded me $27 US on shipping as the actual cost was less than the estimate. Canadian items haven't even had a label created yet. It's actually cheaper for me to get them out of the US.

I got the gloss black V2 for $340 CAD shipped off of the UK site with a 10% off promo code I found.

 

[Drudge]

They do. Comes in three finishes including carbon look. It’s just not in stock on the US site.

Who would carry it? I've been periodically checking the US site over the past 6 months and nothing.

 

[Hockster]

Tried the UK site?

 

[SKStinger]

Who would carry it? I've been periodically checking the US site over the past 6 months and nothing.

Try the uk site. They had all three when I looked today.

 

[Jacques]

I just ordered the V2, rear valance and rear winglets from Maxton.

Debating on the winglets. Maybe when you get them and put them on, take some pics?

 

[Hockster]

Debating on the winglets. Maybe when you get them and put them on, take some pics?

Definitely will. I got them because I planned on the side skirts as well, I want a smooth continuous look front to back. But no one has the side skirts of course.

 

[G-894273]

Has anyone had any luck finding a 1 piece splitter for a base model 2018 Stinger. The car really isnt base any more but body parts it is. Appreciate any help thanks

 

[Joe TRPT]

Are the bumpers the same on a 2019 stinger premium? Nome of the splitters Im finding mention my model. Thanks!

 

[Joe TRPT]

Are the front bumpers on all Stingers the same? I have the 2019 2.0 Premium and it seems that every splitter I see list is for the GT line. Just wondering what my options are. Heck, you guys seem to know pretty much everything about these great cars. Is there a list somewhere that would tell me which mods won't work on my particular car?

Thanks so much guys! I enjoy reading your comments and love my Stinger!

Are the bumpers the same on a 2019 stinger premium? Nome of the splitters Im finding mention my model. Thanks!

Just replying to my own post. I sent the original from my phone and should have been more detailed. Thanks

 

[Daniel @ K8 Stinger Store]

Has anyone had any luck finding a 1 piece splitter for a base model 2018 Stinger. The car really isnt base any more but body parts it is. Appreciate any help thanks

G-894273,​

The ADRO Carbon Fiber Front Lip V1 will fit the 2018 2.0T Base Stinger! If you send me a message, I can get you a discount on that through the K8 Stinger Store!

Kia Stinger - Adro Carbon Fiber Front Lip V1

Sharpen the look of your Kia Stinger front bumper with the Adro Carbon Fiber Front Lip V1. This genuine 100% real Carbon Fiber Front Lip perfectly accents your Kia Stingers body lines. This product is made in S. Korea & perfectly fits & enhances the look of your Stinger. This is compatible on...

www.k8stingerstore.com