Door Striker Plate Covers

[RUFFSTUFF]

Just got a set of door striker covers and they sent me 16 pieces of 3M tape for installation... 8 thin tapes and 8 thick. Which ones go where? It seems to me that I shouldn't need more than 2 pieces per plate, but thick or thin?

Thanks!

 

[ShannonC]

Fairly sure I only used 2 of the thicker on each piece.

 

[OliverNuther]

I didn’t use the tape at all. I just friction fit them and they haven’t budged. That was about 12 months ago.

 

[AV8R]

Each seller has differing application methods, mine had 2 pieces of tape that I used.

 

[Stiletto]

I put a dab of Gorilla glue on mine. Flush fit.

 

[Bigbikes]

Just got a set of door striker covers and they sent me 16 pieces of 3M tape for installation... 8 thin tapes and 8 thick. Which ones go where? It seems to me that I shouldn't need more than 2 pieces per plate, but thick or thin?

Thanks!

Its up to you i used the thin ones..only to stop rattles

 

[RUFFSTUFF]

I used the thin ones and it seems to work fine. Makes me wonder why the different sizes still...

 

[SKStinger]

You're overthinking it. Just slap the thin ones on each end of the striker plate and stick it on. Mine haven't moved since. Save the thicker pieces for another project. I used a couple on my rear Stinger badge on the edges.

 

[RUFFSTUFF]

As if overthinking is a crime..