Brake Vent Fix

Status
Not open for further replies.
Does any one what a copy of the templates? They are very ad hock but I can scan them onto a A4 doc.
 
AV8R said:
Does any one what a copy of the templates? They are very ad hock but I can scan them onto a A4 doc.
Click to expand...
Yes pls , would like to see a shot of the actual screen in a tight shot as well , great solution mate ~!
 
______________________________
All the mods and upgrades for your Stinger you could ever ask for. CLICK HERE!
From interior to exterior to high performance - everything you need for your Stinger awaits you...
One thing to note, when you fit the mesh you have to lift the lining up slightly and slide in diagonally then shimmy it around til it fits in place. I used a small screwdriver to lift the edge up and over the mesh but be careful you don’t tear it. There is not much room to manoeuvre so take your time. Better if you can get wheel off. From start to finish took me 90 mins.
 
thanks buddy !
 
______________________________
All the mods and upgrades for your Stinger you could ever ask for. CLICK HERE!
From interior to exterior to high performance - everything you need for your Stinger awaits you...
mud 1.webp


I think these mudguards plus the mesh in the vents should minimixe the rock chip issue
 
All the mods and upgrades for your Stinger you could ever ask for. CLICK HERE!
From interior to exterior to high performance - everything you need for your Stinger awaits you...
AV8R said:
Ok after ALOT of stuffing about I got the screens in. I went down to my local security screen door place and they gave me some heavy duty stainless steel mesh which was painted black. I cut a template using cardboard from a cereal box and trimmed so it was slightly bigger than the hole as they is a recess in the brake vent opening that you have to fit to as the lining has to overlap it and hold it in and prevent water from getting in. At no time did I have to remove and lining or the wheels.
The hardest part was cutting the mesh. Any way all done! Looks great.
One other thing to note the vents are different sizes, don’t know why.
View attachment 7948 View attachment 7949
Click to expand...

Your next job is manufacturing, making a DiY kit and getting it on the Bay. I say $49.95. (Discount coupon for forum members!) :geek:
 
Ya you are welcome for that brilliant idea I had. Just kidding looks great that’s what mine look like. It’s definitely worth few bucks and time to save on repainting doors. Watch how much crap collects in there between washes you will be happy you did it.
 
Kia I hope you are paying attention to these threads. Lots of stuff they can do to tweak car make it better.
 
All the mods and upgrades for your Stinger you could ever ask for. CLICK HERE!
From interior to exterior to high performance - everything you need for your Stinger awaits you...
Status
Not open for further replies.

Cars Connected in the Apple App Store Cars Connected in the Android App Store
Great resources:
- VIN Check
- Clean your leather!
- Safe Emergency Charging
- Windshield Repair Kit
- Chemical Guys HydroSpeed Ceramic Quick Detailer
- Chemical Guys HydroCharge High-Gloss Hydrophobic SI02 Ceramic Spray Coating
- Get a dash cam!
- Auto Buyers Market
Protect your Stinger from code scanners
Back
Top